Fix ‘0x0000007b errors in Windows’ Issue – Guide
Windows users running versions prior to Windows 10 have been experiencing an increase in the 0x0000007B BSOD error, which occurs when a PC loses access to its system partition during boot. This error is referred to as INACCESSIBLE_BOOT_DEVICE.
Computer users may encounter the error code 0x7B when attempting to boot their device, typically due to device driver issues, virus infection, data corruption or other hardware failure. This can prevent the computer from accessing the hard disk that stores boot records.
How to Fix STOP errors 0x0000007B
If you’re experiencing the dreaded blue screen of death with Stop error 0x0000007B, a simple restart may be all it takes to get your computer back up and running.
If you recently installed or changed a hard drive controller, it could be the cause of the STOP 0x0000007B error. To fix this, undo the change and test for the blue screen error. Possible solutions include:
The hard drive controller recently installed has been taken out or changed.
To reverse recent changes to the registry and drivers, users can start their computers with the last known good configuration.
System Restore can be used to reverse recent changes to your computer, allowing you to undo any unwanted alterations.
Rolling back the hard disk controller device driver to a version prior to its most recent update is necessary to resolve an issue.
Ensure SCSI hard drives in your computer are correctly terminated to avoid Stop 0x0000007B errors, which can be caused by incorrect SCSI termination.
Ensure the hard drive is properly installed to avoid this error and other issues.
To avoid the STOP 0x0000007B error, ensure that the hard drive is properly configured in BIOS.
To protect your computer from potential damage, scan it for viruses and malware that could cause a STOP 0x0000007B error. Specifically, look out for malicious programs that target the master boot record (MBR) or boot sector.
Updating hard disk controller drivers can help prevent the STOP 0x0000007B error from occurring. If your drivers are out of date, incorrect, or corrupt, it is important to update them as soon as possible.
To fix the STOP 0x0000007B error, switch the SATA mode in BIOS to IDE mode. This may help prevent the issue from occurring, particularly when using Windows XP or during installation of the operating system.
Running the chkdsk command can help repair a corrupted boot volume on your hard drive.
Testing your hard drive is essential if you’re experiencing the STOP 0x0000007B error. If diagnostics indicate a hardware issue, replacing the hard drive may be necessary.
Running the fixmbr command can help resolve the STOP 0x0000007B error, which is often caused by a corrupted master boot record.
Clearing CMOS may be the solution to the STOP 0x0000007B error, which is often caused by a BIOS memory issue.
Updating your BIOS may be the solution to an error caused by incompatibilities between a hard disk controller and an outdated BIOS.
Updating the hard drive controller firmware could be the solution to a 0x7B error. If possible, obtain a firmware update from the manufacturer to see if it resolves the incompatibility issue.
If you’ve recently swapped out the motherboard on your computer and are now experiencing issues, a Windows repair may be the solution.
If you’ve recently replaced the motherboard on your computer without reinstalling Windows, you may need to repair the installation to get it running again.
Final note
We’ve created a guide to help you fix ‘0x0000007b errors in Windows’. If you have any questions, please don’t hesitate to reach out. We’d also appreciate it if you shared the article with your friends.
